#FCC ID SERIAL NUMBER HOW TO#
#FCC ID SERIAL NUMBER SOFTWARE#
#FCC ID SERIAL NUMBER PASSWORD#

#FCC ID SERIAL NUMBER SOFTWARE#

Once logged in, we recommend clicking the 'Check for updates' button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. A DHCP server is configured on the bridge interface. ConfigurationД«y default, the device is configured as a wireless access point, with the first ethernet port (Eth1) configured as a DHCP client, and the second interface bridged together with the wireless interface. Operating humidity can be from 5% to 95% non-condensing. Attach the device to the mounting bracket and turn clockwise until the device secures in place.Attach the second mount to the other side of the ceiling and secure with screws through the first mount.If needed second mounting bracket can be used for additional support when working on thin ceilings or walls, provided screw length is 20 mm.Use 5 mm drill bit if necessary with provided dowels.Attach the mounting bracket to the wall or ceiling with provided three screws.It is possible to attach the device to a wall or ceiling, using the provided mounting bracket on the back of the unit: Connect the power cord to the adapter, and then plug the power cord into a power outlet.Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow.Connect the Ethernet cable from the device to the POE port of the POE adapter.The power consumption under maximum load can reach 13 W. Ethernet port accepts 12-57 V DC вЋ“ (802.3af/at or passive PoE).The device accepts power from the Ethernet port, so you must either use the included passive PoE injector or make sure your switch supports passive or 802.3af/at PoE output. The Mounting ring comes installed on the device, in order to access Ethernet ports please remove it by turning it counterclockwise and the ring will be released.

#FCC ID SERIAL NUMBER PASSWORD#

Choose your country, to apply country regulation settings, and set up your password on the screen that loads.

We recommend clicking the 'Check for updates' button and updating your RouterOS software to the latest version to ensure the best performance and stability.

Once connected to the wireless network, open in your web browser to start configuration, user name: admin, since there is no password by default, you will be logged in automatically.

Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it.

The device will boot up and Wireless network will be available for connecting.

The device wireless access point mode is enabled by default.

Set your computer IP configuration to automatic (DHCP).

#FCC ID SERIAL NUMBER HOW TO#

Connect POE to the Ethernet port 1, please see the cAP ac#Powering section for instructions on how to connect POE.Remove metal ring see cAP ac#Removing mounting ring.It is already configured, you can simply plug in your ISP cable and start using wireless Internet. The cAP ( RBcAPGi-5acD2nD) ac is a ceiling mountable wireless access point.

Fcc id serial number